The NetBiter® webSCADA WS100 is an Ethernet based single-box solution that gives remote web based access to serial devices over Ethernet LAN and Internet. Optionally, it also supports communication over an external modem.

The WS100 has a built-in web server that is used for all configuration and data presentation through normal web browsers. No extra Windows tools or HTML editors are needed.
Data logging to onboard FLASH and web based visualization of historical data on trend graphs. Useful to detect early warnings of malfunctioning equipment. The parameters to be logged can easily be selected by the user on the built-in web pages in the product.
To enable long-term storage the log files can be configured to automatically be sent over the Internet to netbiter.net data site. The files asre sent when the buffer is full or regulary like once a day/week etc.




Alarms and events can easily be configured on the web pages to be sent by email, SMS, SNMP and Modbus TCP. Configuration of alarm conditions and whom to send the alarm is configured through the onboard web pages. All events are stored in an alarm list.
All alarm information can be forwarded to the online management server netbiter.net.
The built-in SNMP function bridges Modbus data to SNMP traps (alarms) to be collected by an SNMP manager. There is a SNMP MIB configuration file available at the support section.




The WS100 gives the user the possibility to easily read and write data to the remote equipment. Through a special template system the configuration is easy and the user can choose what data to appear on the on board web pages.




The WS100 contains a transparent gateway between Modbus RTU (Serial) and Modbus TCP (Ethernet). This feature is useful when connecting serial Modbus devices to supervisory SCADA tools or Ethernet based PLC’s using the LAN in the building. The SCADA tools will be able to access any Modbus data at the remote site usig Ethernet LAN cabling. This can be done in parallel with browsing the built-in web pages.


There are device templates for NetBiter webSCADA WS100 that will make it even easier to configure it for your application.

A template describes the Modbus equipment connected to the NetBiter webSCADA WS100. Upload the template, set the Modbus address and you will immediately be able to show value, write to registers, trig alarms and log parameters. You don’t have to know the actual register address, just select from a drop down box the parameter that should be used.

List of available templates can be find here.



In the NetBiter webSCADA WS100 there is a built in template editor, so you easily can be build your own template for your Modbus devices. You can modify existing templates to match your needs.


NetBiter.net is a web based service that offers remote monitoring and control of machines and automation equipment. The service constantly monitors the health, readiness and geographical position of the equipment 24 hours a day, 365 days a year where it reports current operation and alarm status. Communication is provided over Ethernet LAN, Internet and wireless networks, like GPRS. Read more.